وینچ اسمیتی بیلت سنتتیک XRC9.5

General Description: The Smittybilt XRC Gen2 winches have been thoroughly updated with heavy-duty features for enhanced performance and durability. With capacities ranging from 4309.13 kg to 7937.87 kg, these XRC Series winches are designed to handle various recovery situations. Each XRC winch is equipped with a Series Wound 6.6 hp motor and a 3-Stage Planetary Gear System, featuring revised gear ratios for increased pulling power and quick line speeds. The winch is finished in a rugged UV-Resistant matte black coating, complemented by stainless steel hardware and oversized aluminum crossbars for lasting aesthetics and durability. The package includes a heavy-duty winch controller, an aluminum hawse fairlead, a forged steel tow hook, and a redesigned solenoid box with three mounting positions for maximum versatility. This specific model, 98495, features a synthetic winch rope and comes with a Lifetime Mechanical Warranty and a 3 Year Electrical Warranty. Technical Specifications: Rated Line Pull: 4309.13 kg (single-line) Motor: 6.6 hp Series Wound Gear Train: 3-Stage Planetary Gear Ratio: 161.28:1 Waterproofing: IP67 Rating Clutch: Sliding Ring Gear Brake: Automatic In-Drum Fairlead: Aluminum Hawse Remote Control: Wired Switch, 365.76 cm lead Battery Leads: 182.88 cm Recommended Battery: 650CCA Minimum for Winching Finish: Textured Black Weight: 20.865 kg Mounting Bolt Pattern: 25.4 cm x 11.43 cm Overall Dimensions (L x W x H): 56.642 cm x 13.716 cm x 23.876 cm Drum Size: Diameter 6.35 cm Cable type: Synthetic Rope Cable: 3002.28 cm length, 0.9525 cm diameter Installation Guide: Installation should be performed carefully, adhering to all safety precautions and manufacturer guidelines. It is recommended to read the entire manual thoroughly before installing and using this product. Ensure the vehicle's wheels are blocked when on an incline. Always wear eye protection when working around the battery. The engine should be running when using the winch to avoid flattening the battery. Before beginning spooling, ensure the clutch is disengaged and the remote control switch is plugged in. Do not engage the clutch with the motor running. Never connect the hook back to the cable; always use a sling or chain of suitable strength to prevent cable damage. Observe the winch while operating, and stop the process frequently to ensure the cable is not pulling up unevenly, as jamming the cable can damage the winch. The solenoid box can be mounted in three different positions. The installation method is bolt-on.