سیمکشی پرژکتور سولیس

General Description: The ARB Intensity Solis Wiring Loom provides a complete plug-and-play wiring solution specifically engineered for ARB Intensity Solis driving lights (models SJB21S, SJB21F, SJB36S, SJB36F). This Australian-designed harness features premium components, including 105°C-rated automotive grade wiring, waterproof Deutsch DT-06 connectors, and heavy-duty cables utilizing Zero relay technology for maximum reliability in harsh off-road conditions. The included digital dimmer touchpad offers intuitive 3-button control with 5 preset brightness levels (5%, 25%, 50%, 75%, 100%), allowing drivers to adjust light intensity without taking their eyes off the road. This high-quality wiring loom is designed for durability and ease of installation, featuring all necessary connections and a dedicated switch for the integrated dimmer. It allows for effortless management of the brightness of your Intensity Solis lights, adapting their output to suit various driving conditions and reduce glare when required. This comprehensive and robust electrical solution is essential for unlocking the full functionality of your Solis lights, particularly their unique digital touchpad dimmer control. The loom supports the lights in producing clean and crisp light with a refined color temperature, which helps reduce eye strain and fatigue on long-distance driving while reaching impressive distances down the road to improve safety. With the latest updates to the ARB Intensity Solis driving lights, the loom facilitates excellent spot and flood combinations for both long throw and wide beam. The touchpad is required to operate the ARB Intensity Solis lights if no LINX system is connected. Technical Specifications: Part Number: SJBHARN Brand: ARB 4x4 Accessories Product Type: Auxiliary Light Wiring Harness with Dimmer Touchpad Dimensions: 5.8 cm (L) x 2.5 cm (W) x 1.0 cm (D) Wiring Length: 266.7 cm Wiring Temperature Rating: 105°C Fuse Rating: 20 Amp per light Connector Type: Waterproof Deutsch DT-06 Headlight Compatibility: H4 and HB3 Dimmer Levels: 5 presets (5%, 25%, 50%, 75%, 100%) Weight: 1.04 kg Package Dimensions: 33.27 cm (L) x 10.67 cm (W) x 7.87 cm (H) Country of Origin: Australia Warranty: 2 Years Fitting Time: 60 minutes approx. Installation Guide: 1. Remove the negative (-ve) cable from the vehicle battery. 2. Layout the Main harness in the engine bay and mount the four fuses in a convenient location. Fuses can be stacked together. Fuses must be mounted upright with terminals facing down, protected from submersion or splashing from water and mud. 3. Feed the Touchpad connector on the Main harness through an existing grommet in the firewall and pull it into the vehicle cabin. It is recommended to fold back the cable and pull the connector through tail first. If required, apply lubricant. 4. For negatively switched headlamp vehicles, an additional relay is required. 5. For CANBUS controlled headlamp vehicles, the high beam and clearance light signals are not available without additional hardware. Contact your vehicle supplier or ARB for advice on how to connect these. 6. Connect the illumination signal wire with the front clearance light wire (parkers) or with the illumination circuit within the cabin. 7. Connect the Chassis grounds to a suitable ground point on the vehicle body or chassis. Do not connect directly to the battery negative. 8. Connect the Driving light connectors to the Solis driving lights. Secure all cables and check all connections. 9. Connect the two Positive terminals to the battery positive terminal and reconnect the negative (-) cable to the battery. 10. Check the correct operation of the Touchpad and Solis driving lights. Safety Notes: Ensure all electrical connections are correct and tight with good earth connection to the engine and/or chassis. Failure to do this may result in component failure or fire. Make sure all wires are securely fastened away from any hot, sharp or moving surfaces. Do not fasten any wires to the brake lines or fuel lines. Make sure that all electrical connections are strong and well insulated. Work safely at all times. This product must be installed exactly as per these instructions. The installation of this product may require the use of specialized tools and/or techniques. It is recommended that this product is only installed by trained personnel. During installation, it is the duty of the installer to check correct operation/clearances of all components. Unless otherwise instructed, tighten fasteners to specified torque. Do not pull on the wiring harness forcefully.