سویچ پنل AUXBEAM مدل AR-800

General Description: The Auxbeam AR800 RGB Switch Panel is an 8-gang switch panel designed to control up to 8 accessories from a single smart hub. It features RGB backlighting, Bluetooth app control, and three switch modes: Toggle, Momentary, and Pulsed. This rugged and waterproof unit is rated IP65 and offers total flexibility for off-road or overland builds. It includes universal mounting options and incorporates safety protections such as a built-in resettable fuse, reverse polarity protection, over-voltage protection, and over-current protection. The system can be controlled via the physical switch panel or a smartphone app. Technical Specifications: Working Voltage: 12V–24V DC Max Current: 60A Power Rating: 720W @ 12V / 1200W @ 24V Operating Temperature: -40°C to 105°C Waterproof Rating: IP65 Switch Operation: On-Off with 3 mode status indicators (Red for Toggle, Blue for Momentary, Green for Pulsed) Installation Guide: Disconnect negative battery terminal cable. Locate a suitable path to route the switch panel wire through the vehicle's firewall, for example, using a rubber grommet on the driver's side. Decide on the preferred mounting location for both the switch panel and the circuit panel box, such as the dash, center console, or overhead area, and utilize the provided mounting brackets. Mount the circuit panel box in the chosen location. Connect the red positive power cable from the circuit panel to the 60A circuit breaker, and then connect an additional red positive cable from the breaker to the positive battery terminal. Connect the black negative cable from the circuit panel to the negative battery terminal or a suitable vehicle ground point. Connect the switch panel wire that was routed earlier, the red ACC Fuse wire, and all necessary accessory wires to their respective terminals. For the ACC Fuse connection, insert the provided fuse adapter into an existing ACC-powered fuse slot in your vehicle's fuse box. This ensures the switch system and connected accessories power off with the vehicle, preventing battery drain. Connect the positive wires of your auxiliary lights or other electrical devices to the corresponding output terminals (1-8) on the control box. Connect the negative wires of these accessories to a common ground point or the negative terminal of the control box. Secure all wires neatly using the provided zip ties. Reconnect the negative battery terminal. Turn on your vehicle's ignition and test the functionality of the switch panel, the mobile app control, and all connected accessories.