کیت سیم کشی Wolfbox

General Description: The WOLFBOX Dash Cam Multifunctional Hardwire Kit is an accessory designed to connect a dashcam to a vehicle's electrical system. It provides continuous power to the dashcam, enabling parking mode surveillance. This kit offers a permanent and discreet cabling solution, eliminating the need for a car cigarette lighter socket connection and simplifying installation. It also incorporates multiple security protections for enhanced safety. Technical Specifications: Cable Length: 350 cm Output: 5V/2A steady Input Voltage: 12V-24V Low Voltage Protection: Automatically cuts off power after 60 seconds when the voltage drops below 11.6V (+-0.2). Not suitable for trucks with voltage exceeding 24V. Additional Security Features: Over-current, short-circuit, reverse connection, and overheat protection. Compatibility: Compatible with most dash cam brands, particularly those powered via a Type-C port. This kit is specifically for devices like the WOLFBOX G900 Pro and TriPro (4 Amp Output). Installation Guide: The hardwire kit is designed for easy installation, providing a permanent hidden cable solution without using the car's cigarette lighter socket. To install: 1. Locate your vehicle's fuse box. This is typically found under the dashboard on the driver's side or within the engine compartment. 2. Identify the ACC (Accessory) fuse slot, which supplies power when the ignition is on, and a constant power fuse slot, which provides power even when the ignition is off. 3. Connect the red wire from the hardwire kit to the ACC fuse slot to ensure the dashcam receives power when the car's ignition is turned on.