نوار نوری 21 اینچی تک ردیفه TJM یک نوار نوری شیک و قدرتمند است که 3917 لومن موثر تولید می کند و در فاصله 438 متری، 1 لوکس نور را ایجاد می کند. الگوی پرتو ترکیبی آن پخش یکنواخت نور را تضمین می کند. این محصول دارای محفظه آلومینیومی سبک وزن است که 15 عدد LED پرقدرت 3 واتی Osram را در خود جای داده و توسط یک لنز پلی کربنات محافظت می شود. رتبه بندی IP67 برای مقاومت در برابر گرد و غبار و آب، عملکرد آن را در هر شرایطی تضمین می کند. این نوار نوری برای وسایل نقلیه 12 ولت و 24 ولت مناسب است و همراه با براکت های نصب کشویی عرضی و جانبی و سخت افزار فولاد ضد زنگ عرضه می شود.
English Description
General Description:
The TJM 21" Single Row Light bar is a sleek and powerful light bar that generates 3917 effective Lumens and produces 1 lux at 438m. Its combo beam pattern generates an even spread of light. It features a lightweight aluminum housing that surrounds 15 high output Osram 3W LEDs, which are protected by a polycarbonate lens. An IP67 dust and waterproof rating ensures it performs in all conditions. This light bar is suitable for both 12v and 24v vehicles and comes with cross-sliding and side mounting brackets and stainless steel hardware. Please note that the compatible wiring harness (Item Code: 033WHSPOTFOGSAA, TJM Wiring Harness Spot/Fog Single) needs to be ordered separately.
Technical Specifications:
Effective Lumens: 3917
Lux at 438m: 1 lux
Beam Pattern: Combo Beam
Lens: Polycarbonate
IP Rating: IP67 (dust and waterproof)
Voltage: 12v and 24v
LEDs: 15 high output Osram 3W LEDs
Housing: Lightweight aluminum
Weight: 2.10 kg
Length: 69.0 cm
Width: 10.0 cm
Height: 10.0 cm
Installation Guide:
The light bar includes cross-sliding and side mounting brackets along with stainless steel hardware for installation. A wiring harness compatible with this light bar (Item Code: 033WHSPOTFOGSAA) must be ordered separately. Installation typically involves selecting a suitable mounting location, securely mounting the light bar using the provided brackets, and routing the wiring harness from the vehicle's battery to the light bar. The ground wire should connect to the negative terminal of the battery. Drilling may be required for mounting.