سویچ پنل AUXBEAM مدل KS-80

General Description: The Auxbeam KS-80 Knob RGB Switch Panel is a complete multifunctional lighting control center designed for DC 12V-24V accessories. This professional 8-gang switch panel centralizes control by replacing multiple individual switches with a single dash-mounted unit. It features an RGB backlit knob panel with adjustable color and 7 brightness levels, along with 4 switch modes (Toggle, Momentary, Pulsed, and SOS) configurable per channel for various situations. The panel offers one-touch sync capabilities for all lights, including instant full lighting (Toggle), urgent visual warnings (Strobe), and dynamic chase effects for 2 to 8 devices. It also includes master dimming for precise control of individual work lights, synchronized management of multiple lighting systems, or fine adjustment of fan speeds. The KS-80 is equipped with four external triggers, enabling seamless automation with your vehicle's factory signals like high beams, reverse, brake, and hazard lights. Built with a 120A all-solid-state load system (3x30A + 4x20A + 1x10A outputs), it ensures safe and reliable operation without mechanical relays or wear points, supporting a total capacity of 120A. It is widely compatible with RVs, trucks, pickups, boats, UTVs, ATVs, and comes with a 3-year warranty. Technical Specifications: Voltage Input: DC 12-24V Max Current: 120A Rated Current: 100A Max Power: 1200W (12V) / 2400W (24V) Output Configuration: 3x30A + 4x20A + 1x10A (8 channels) Relay Type: All-Solid-State Modes: Toggle, Momentary, Pulsed, SOS External Triggers: 4 (High Beam, Reverse, Brake, Hazard) Remote Range: Up to 200 ft (optional remote) Panel Backlight: RGB adjustable, 7 brightness levels (0%, 15%, 30%, 45%, 60%, 75%, 100%) Material: Aluminum (bottom part of switch box) International Protection Rating: IP65 Included Components: Switch Panel, Circuit Control Box, 100A Circuit Breaker, Stickers, Hardware Kits (fuses, mounting hardware) Item Dimensions L x W x H: 15.35 x 9.06 x 5.12 inches Circuit Type: 8-way Mounting Type: Panel Mount Operation Mode: ON-OFF Contact Type: Normally Closed Connector Type: Plug In Switch Type: Push Button Terminal: Screw Upper Temperature Rating: 221 Degrees Fahrenheit Working Temperature Range: -40F to 221F Warranty: 3-Year Auxbeam official warranty Installation Guide: The installation of the Auxbeam KS-80 Knob RGB Switch Panel involves mounting the control panel, connecting the wiring, and configuring customization options. Mount the circuit breaker: Securely attach the 100A circuit breaker, typically on top of the factory fuse panel, ensuring it is anchored properly. Connect main power: Run the main power wires from the battery to the circuit breaker and then to the control box. Two heavy-duty cables are provided for positive and negative connections. Route switch panel wire: Feed the cable connecting the switch panel to the control box through the firewall, often utilizing an existing grommet or drilling a new one and inserting a grommet for cleanliness. Connect ACC power: Connect the ACC power line to ensure the switch panel receives power when the vehicle's ignition is on. Connect external triggers: Optionally, wire the four external trigger lines (high beam, reverse, brake, hazard) into your vehicle's factory circuits to enable automatic activation of auxiliary lights. Connect optional wireless remote: If using, connect the antenna for the optional wireless remote to enable control from up to 200 feet away. Connect accessory wires: Route and connect the individual accessory wires to the corresponding output terminals on the control box, which are located at the bottom. The control box has 3x30A, 4x20A, and 1x10A outputs. Refer to the user manual: Always consult the user manual for detailed diagrams and specific instructions for your vehicle.