آینه و دوربین ثبت وقایع Wolfbox G900TRIPRO BUMPER

General Description: Triple-Cam Full Coverage system providing a 4K front camera, a 2.5K rear camera, and the world's first 1080P front bumper camera, ensuring complete front, rear, and ground visibility with no blind spots, ideal for both on and off-road driving. Born for off-road adventure, the front bumper camera helps to effortlessly spot obstacles ahead. It features dual advanced sensors, including the Sony IMX678 for the front and OS04J10 for the rear, which deliver ultra-clear, vivid footage and exceptional night vision in various lighting conditions. Enjoy instant file transfer and smooth in-app control with fast 5.8GHz Wi-Fi connectivity. The Smart Collision Guard offers automatic impact detection and 24/7 parking monitoring to keep the vehicle protected at all times. Built-in GPS provides real-time speed and location tracking, enhancing the driving experience by offering crucial information at a glance. The device incorporates a 12-inch touchscreen display for real-time monitoring and easy control, supports voice control for hands-free operation, and features Triple HDR for improved image quality. The versatile rear camera offers flexible installation options, either inside or outside the vehicle. An upgraded super capacitor ensures reliable performance even in extreme temperatures or sudden power cuts. The product also includes a 256GB microSD card for immediate recording. Installation of the mirror unit is designed to be straightforward, attaching to the existing rearview mirror with provided straps, and the bumper camera is waterproof for durability in harsh weather. Technical Specifications: Dash Cam Model: G900TriPro Number of Channels: 3-Channel Front Camera CMOS: Sony STARVIS IMX678 Front Camera Resolution: Native 8MP, 4K (3840x2160) at 30FPS Front Camera Aperture: F1.8 Front Camera HFOV: 112° Front Camera FOV: 130° Bumper Camera: MIS2031 (AHD, HDR, Waterproof) Bumper Camera Resolution: 1080P at 25FPS Bumper Camera Aperture: F2.0 Bumper Camera HFOV: 107° Bumper Camera FOV: 131.8° Rear Camera CMOS: Omnivision Purecel® Plus OS04J10 (ETH, Mounted Outside the Car) Rear Camera Resolution: 4MP, 2.5K (2560x1440) at 30FPS Rear Camera Aperture: F1.9 Rear Camera HFOV: 128° Rear Camera FOV: 150° Display Screen Size: 12" IPS LCD Touchscreen Sensor Size: 1/1.8" (Front), 1/1.88" (Rear) Image Noise Reduction: 3DNR+3DNR DDR: 8Gb WIFI/APP Control: Support (5.8GHz) Voice Control: Support Fatigue Driving Alert: Support SD Card Included: 256GB Maximum Storage: 512GB (256GB recommended for stability) Loop Recording: Support (1/2/3 minutes options) Parking Assistance: Support Parking Monitoring: Support with Hardwire Kit (G-Sensor Triggered Recording, Time-Lapse Recording 12/24/48 hours, Impact Parking Mode with voltage cut-off at ~11.8V) GPS Player: Support Installation Guide: Mirror Installation: The main mirror unit attaches to your pre-existing rearview mirror using the provided silicone rubber straps. Ensure a secure fit with the appropriate strap size for your mirror. Front Bumper Camera Installation: This camera can be mounted using double-sided sticky tape or a mounting bracket with screws. It is crucial to ensure the camera is flat and level, avoiding an angled-down view. Route the camera wire through your vehicle's grill, then under the engine bay, and through the firewall to the floorboard. Continue routing the wire up the A-pillar and finally to the main mirror unit. Use electrical tape around connections to ensure weather and waterproofing. Rear Camera Installation: The rear camera offers flexible mounting options, either inside or outside your vehicle, and can be mounted on the license plate using the included bracket. Route its wires through existing rubber feed plugs in the back of the rear cab, along the interior trim, and to the main unit. Hardwiring Kit Installation (for parking monitoring): The black wire from the hardwiring kit should be connected to a ground point, such as a bolt near your car battery. The yellow (BATT) wire connects to a constant power source, and the red (ACC) wire connects to an ignition-switched power source. Feed these wires through the firewall to the floorboard, then up the A-pillar, and into the side paneling to reach the main mirror unit. A pry bar can be useful for tucking wires under trim. GPS System Installation: The GPS system simply plugs into the main unit. Route its wires along the top of the windshield and down the side, or wedge it between the windshield and the dash. General Installation Tips: Before finalizing camera placement, especially for the front bumper and rear cameras, check for sun visor clearance if installed internally. Always stick 3M adhesives directly to glass surfaces for optimal adhesion. When connecting the rear camera's AV plug, push it until you hear a "click" to ensure a sensitive and secure connection. For enhanced stability and to prevent vibration-based disconnects, consider using electrical tape around the extension joiner for the rear camera. Ensure the power cable is plugged into the top-left port of the main unit. Troubleshooting: If you encounter a "Please Format SD Card" message, navigate to Settings and select Format. If the screen is blank or there is no power, verify that the power cable is in the top-left port and check all hardwire connections. If the rear camera is not detected, push its AV plug until it clicks. If the rear camera image appears upside down, toggle the "Rear Flip" or "Mirror Flip" option in the touchscreen menu.