فیلتر هوا لندکروز 200 K&N

General Description: K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants. They are designed to provide an increase in horsepower and acceleration. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N's No-Hassle Lifetime Limited Warranty, or 10-Year/Million Mile Limited Warranty. These drop-in replacement filters are designed to install easily into your factory air box. They also improve fuel economy and their eco-friendly reusability reduces waste. The filter provides up to 99% filtration efficiency and is made in America. It should be cleaned every 50,000 to 75,000 miles under normal highway driving conditions. Technical Specifications: Filter Media Material: Cotton Gauze (layered, oiled) Air Filter Style/Shape: Panel Side A Length: 12.75 inches Height: 1.375 inches (35 mm) Width: 12.00 inches (305 mm) Weight: 2.6 lb (1.2 kg) Filter Re-Oiling Amount: 2.73 oz (81 ml) Oil Included: Yes Overall Filter Efficiency: Up to 99% efficiency Vehicle Applications: 2007-2014 Toyota Tundra 2008-2013 Toyota Sequoia 2007-2021 Toyota Land Cruiser 2007-2021 Lexus LX570 Installation Guide: This K&N air filter is a direct replacement for the stock air filter, and no modifications will be required. However, the following procedures MUST be followed to ensure the proper fit and seal of the K&N Air Filter, and must be followed every time the filter is serviced, otherwise the filter may not seal, and damage to the engine could result. 1. Locate the plastic cover on the driver's side of the engine. 2. Locate the words “Clip Behind” on the plastic cover, pull the cover up from this location. 3. Remove the plastic cover, set it aside, then locate the air box. 4. Un-clip the two metal clips on the top of the air box, pull up, the lid will slide out. Remove the lid and set it aside. 5. Remove the OE filter by using the tab and sliding the filter out. Dispose of the OE filter. 6. Remove the K&N filter from the package. Check to ensure that the K&N filter and plastic cage are seated together. 7. Using the tab on the plastic cage, slide the K&N filter into the air box. 8. Slide the lid back into the air box. Ensure the lid is seated all the way down and re-clip the metal clips. 9. Re-install the plastic cover. Note: When cleaning, the K&N filter must be removed from the plastic cage.