پرژکتور باها دیزاین S1

General Description: The Baja Designs S1 fills the role of a large light in a small, compact design. It uses a highly specialized reflector and next-generation LEDs to deliver significant brightness. Its compact size allows for easy installation in tight spaces, making it highly versatile without compromising brightness or performance. The S1's durable construction is designed to withstand rugged environments, ensuring reliability in harsh conditions. Featuring advanced LED technology, the S1 light delivers 2,320 raw lumens per light, providing exceptional visibility whether off-roading, navigating challenging terrains, or enhancing vehicle aesthetics. It is designed for adventurers, off-road enthusiasts, and those seeking top-tier lighting solutions, embodying reliability, durability, and performance in a compact package. The product also features uService for replaceable lenses and optics, ClearView for optimal light placement, MoistureBlock for waterproof capabilities, CopperDrive for 100% LED power, and 5000K Daylight for reduced driver fatigue and natural color. It is backed by a 30-day satisfaction guarantee and a limited lifetime warranty. Technical Specifications: Lens Color: Clear Lens Material: Hardcoated Polycarbonate Light Quantity: 2 Lighting Modes: Beam Lighting Technology: LED Lighting Type: Forward Projecting Mounting Hardware Included: Yes Mounting Hardware Material: Stainless Steel Overvoltage Protection: Built-In Product Type: S1 LED Light Pod Pair with Wiring Harness Voltage: 9-28 V Wattage: 19.596 W Amperage Rating: 1.420 A Average Rated Life: 49,930 Hours Beam Pattern: Spot Bezel Material: Powder Coated Cast Aluminum Housing Material: Hard Anodized Machined Aluminum Brightness: 2,320 Lumens per light Dimensions Height: 5.334 cm Dimensions Width: 5.334 cm Dimensions Depth: 5.334 cm Weight: 0.1814 kg Standards/Compliance Durability: Exceeds MIL-STD810G (Mil-Spec Testing) Standards/Compliance Water Resistance: IP69K (Waterproof up to 274.32 cm & Pressure Washable) Standards/Compliance Impact Resistance: IK10 Compliant (Mechanical Impact Testing) Installation Guide: Universal S1, S2, Squadron Instructions: 1. Begin by removing the light and bracket from the box and assemble using referenced image. 2. Locate the hardware bag(s) included in the box. For the S1, place the 1/4-20 x 0.875” bolt through the S1 Bracket with associated washers and lock nut as shown. Do not fully tighten the lower mounting bracket hardware until the light has been aligned. 3. If flush mounting: Trace the template on the mounting surface before cutting out the material. Make sure the light slides in the newly cut opening. Hold the light flush to the opening. Mark the four outer holes, remove the light, and drill with an 11/64” drillbit. Remount the light using the supplied hardware and connect the light to the harness. 4. For other mounting, use the provided O-Ring on the back of the light in the shaded groove. Feed the light's cord through the larger, 3/8 hole and use the supplied connector to attach it to the light. Refer to the electrical diagram. 5. Use the provided 1/4”-20 bolts and associated hardware to fasten the light to the mounting surface. Use Loctite when installing the hardware to ensure they remain securely fastened. 6. Due to inconsistencies of mounting surfaces, ensure even pressure is applied all around the O-Ring. Use additional silicone or waterproofing material if needed. 7. As with any electrical accessory, Baja Designs lights must have circuit protection (fuse or circuit breaker). 8. Tie all wires away from sharp, hot, and/or rotating components.