پرژکتور اینسنتی گرد نقطه ای 7 اینچی ARB

General Description: The ARB Intensity V2 LED light range is engineered in Australia and manufactured in the United States, designed to meet the demanding requirements of off-roaders globally. It produces clean, crisp light with a refined color temperature that helps reduce eye strain and fatigue during long-distance drives. The lights utilize the latest optic and LED technology, specifically OSRAM GIANTS, and feature an optimal chassis design for effective heat dissipation through a die-cast aluminum body. The spot-light configuration incorporates advanced Hyperspot technology to provide focused and intensified light output. When paired with a flood light (part of the V2 range, not AR21SV2 itself), it offers both long-range and shoulder-to-shoulder visibility. These lights boast superior-grade electronics, first-class active-thermal management, and optimized lens and optic configurations. They are equipped with a virtually indestructible polycarbonate lens and a hard-coated durable-polycarbonate protective cover. The product is dust and waterproof to an IP68 rating, submersible to 3 meters, compliant for radio interference suppression (RFI/EMC), and vibration tested to military specifications (Mil810-Stdg certified). It also features a Gore-Tex breather with pressure tested seals, reverse-polarity voltage protection, and a lifespan exceeding 50,000 hours. Technical Specifications: Number of LEDs: 21 high-powered OSRAM square LEDs Power: 105 Watts Raw Lumens: 13,170 lumens Effective Lumens: 5,760 lumens Color Temperature: 5700k Beam Spread: 6 degrees Light Distance @ 1 LUX: 693 meters Input Voltage: 10-36VDC DC Voltage: 14.4V Current Rating at 20°C: 7.3 Amps Operating Temperature: From -40°C to 63°C Dimensions (Width x Height x Depth): 19.05 cm x 21.25 cm x 11.56 cm Weight: 2.5 kg Warranty: 3 Years Required Wiring Loom Part Number: 3500480 (ARB Wiring Loom) Installation Guide: Installation requires the ARB Wiring Loom (Part Number 3500480), which is designed with high-current wiring and components capable of handling up to 40 Amps. General installation steps for the light itself include: Place the light body lens down on a clean flat surface. Insert one M8 Nyloc nut and one 6mm nut into each cavity in the light body, using a nut spacer to hold them in place. Slide the mounting bracket around the nut spacers and secure it to the light body using M8 cap screws and flat washers, along with M6 tamper-proof Torx bolts with flat and spring washers. The bracket can be oriented to suit vertical or horizontal mounting surfaces. Lubricate bolt threads with a nickel or lanolin-based lubricant, such as Loctite 771 or Lanotec. Attach the light to the bull bar or flat mounting surface using the M12 mounting hardware and M8 pinning hardware where provision allows. Pinning bolts should be used for off-road applications, which may require additional drilling or modification of the mounting surface. If drilling, apply rust prevention. Ensure all electrical connectors and the wiring loom are secured away from sharp edges and hot surfaces. Regularly check all mounting and adjusting bolts to ensure they are secure and torqued. Recommended torque settings: 6mm Torx bolt: 9 Nm 8mm cap screw: 22 Nm 12mm mounting bolt: 77 Nm For maintenance, clean the light with warm soapy water and a sponge or soft brush. Do not use solvents, scourers, or hard bristle brushes. Periodically remove the clear cover to clean the light lens. There are no user-serviceable components within this light; do not disassemble it. For further service or repair, return it to your local ARB distributor. For vehicles equipped with Bi-LED headlights, the NHWA02H26 High Beam Adaptor is required to ensure seamless integration and optimal performance.