سویچ پنل AUXBEAM مدل RA60

General Description: RGB backlight with unlimited color options and automatic dimming to match dash lighting and vehicle environment. It features three mode settings: Toggle (constant light mode for devices like fog lights), Momentary (press and hold to activate, release to turn off, similar to a horn button), and Pulsed (flash mode, press once to flash on/off continuously until pressed again). Manual backlight off function allows turning off the backlight when not necessary or during daytime. Customize your switch panel with 60 universal labels to indicate connected devices. Includes a 304.8 cm wiring harness for extended reach. Comes with a waterproof cover to protect the switch panel from rain, snow, or water. This 6-gang one-sided outlet switch panel enables control of up to 6 different LED lights or devices, meeting all electrical needs. It offers universal fitment for various vehicles, including trucks, boats, cars, buses, off-road vehicles, powersports, marine, ATVs, UTVs, SUVs, side-by-sides, and heavy-duty machines. Features an easy installation process with no complicated wiring or the need to cut a large hole in your vehicle. The panel has a memory function that retains the last active state and lighting mode for each switch even after power cycling. The upgraded control box includes a one-sided outlet design, a built-in solid-state relay, spare fuses, and clearly labeled outputs with malfunction indicator lights for flexible and secure installation. Technical Specifications: Voltage Input: DC 12-24V Max Current: 60A Rated Voltage: 12V 20A / 24V 10A Max Power: 720W/12V, 1400W/24V Waterproof Rating: IP65 Operating Temperature: -40°C to 105°C Wiring Harness Length: 304.8 cm Battery Cables: 7AWG, 213.36 cm long (red for positive, black for negative) Terminal Lugs for Battery Cables: 0.58 cm and 0.79 cm Signal Wire Extension Length: 609.6 cm (4-pin wiring harness extension) Installation Guide: Mounting the Switch Panel: The switch panel can be mounted using either an angle-adjustable mount or a slim-line flush mount, depending on your vehicle's interior and preference. Wiring the Control Box: Securely mount the control box in the engine bay. Connect the power and ground wires to your vehicle's battery, and then connect the output wires to your auxiliary devices. Ensure all connections are tight and properly insulated. Connecting Power: Connect the red 7AWG battery cable to the positive (+) terminal of your vehicle's battery. Connect the black 7AWG battery cable to the negative (-) terminal of your vehicle's battery or a suitable chassis ground point. Connect the other ends of the battery cables to the corresponding terminals on the control box. Ensure connections are tight and secure. Connecting the Switch Panel to the Control Box: Use the provided 4-pin signal wire to connect the switch panel to the control box. Wiring Accessories: Connect your desired accessories (e.g., LED light bars, fog lights, auxiliary lights) to the corresponding output terminals on the control box. Wiring Method: Connect the ACC wire to the cigarette lighter or radio fuse to get power. Connect the main power and ground wires from the control box to the vehicle battery. Connect your auxiliary devices to the corresponding output connections on the control box (Circuits 1-6). Changing Backlight Color: Press the "MODE" button and any switch button simultaneously. Long press Switch 1 or Switch 4 to cycle through RGB colors. Press the "MODE" button again to save your selection.